Efficiently managing your heating system should be a top priority, especially now that the heating season is well underway.

There are plenty of easy wins here that are often overlooked, often with no associated upfront cost.

1. Set thermostats depending on room usage

Guidelines generally recommend setting the temperature at 19°C in working areas. However, temperatures can be set lower than this in corridors, storerooms or areas of higher physical activity. A 1°C reduction in temperature shaves 8% off your heating bill!

  • Tip: Allocate a specific member of staff to be responsible for heating controls to make sure they aren’t tampered with.
  • Myth buster: Turning the temperature up on the thermostat will not warm the room up quicker!

2. Ensure timers and thermostats are set to the right date and time

You must take into account your scheduled operating hours, daylight savings time, weekends and Bank Holidays.

  • Tip: Relocate any thermostats that are too close to radiators or draughts.

3. Ensure radiators and heaters are clean and unobstructed 

Workstations can be brought closer to heat sources as long as they do not cause any obstructions.

  • Tip: Do not use portable electric heaters unless absolutely necessary. They are extremely expensive to run compared to standard central heating.

4. Identify any draughts coming in from outside.

Up to 30% of heating costs can be saved by stopping cold air from entering your building. Check seals on windows and doors, use cheap draught excluders if needed, and consider fitting spring-loaded door closures or PVC strip curtains if doors are left open.

  • Tip: If you have roller shutter doors, it’s possible to interlock the controls for these doors with your heat controls, so the heating automatically turns off when the door is opened.

5. Insulate heated pipework/hot water cylinders 

Insulating pipework with cheap foam lagging can reduce energy loss by 70%. You can fit it yourself and it will pay back in a matter of weeks. The image below shows how much heat can be lost through uninsulated pipes.

Heating Insulated Pipes

6. Consider installing destratification fans if you have high ceilings

Destratification fans can be a relatively low-cost measure in warehouse spaces that stop warm air from gathering in the ceiling space by spreading it around the building evenly.

7. If you have an old non-condensing boiler, consider upgrading it as soon as possible

A non-condensing boiler with limited controls is significantly less efficient than a modern condensing boiler. Better still, investigate options to recover waste heat from your processes, replace your boiler with a heat pump, or install radiant heating technologies such as infrared heating, which heat objects rather than the air.

  • Tip 1: If your boiler was installed before 2005 or it has a metal flue, it’s probably a non-condensing boiler.
  • Tip 2: Make sure your boiler is serviced annually to keep it working optimally.

The image below shows the Manchester-based lubricants manufacturer Metalube, which saved £24,000 a year by installing a new energy efficient steam boiler.

Heating Metalube

Need support?

If you are seeking a trusted, local supplier for installing energy-saving technologies, use our online marketplace

This blog was originally published on the Bee Net Zero website.

Decarbonise Your Business

Sustainability and net zero support from Green Economy

Expert advice to help you reduce carbon, increase competitiveness and save your organisation money.

Explore services

Green Intelligence - straight to your inbox

Share this case study

Alasdair Dalzel-Job

Sustainability Business Advisor

Alasdair provides resource efficiency and environmental risk support to businesses, helping them to identify and implement low carbon solutions. As well as a Master’s degree in clean technology, Alasdair has two decades' experience in the environmental field. He is an ESOS Lead Assessor, a member of the Chartered Institution of Wastes Management, an Associate Member of IEMA and an IEMA Associate Environmental Auditor.